Product introduction:
1.Fixture and machine tool fixed surface with safety with safety groove
design, when assembling and dismantling the fixture, it can effectively
prevent the fixture from falling off and causing accidents.
2.The bevel wedge Angle for adjusting the width is a selflocking desig-
n, ensure that the fixture does not shift after long compression.
3.The stressed parts are made of 40Cr material, after quenching, suffi-
cient hardness is ensured.
4.The locking plate screws are made of fine tooth screws with special
spherical contact, the precision of fine adjustment is guaranteed.
5.The pressing plate of the scimitar adopts hook design, even when
the fixture is released, it can prevent the tool from falling off.
6.Rotating handle design effective die thickness error, make sure the
mold is always clamped.
7.The pressing plate can be added with elastic polyurethane, effective-
ly ensure clamping of section mold.
8.Major precision dimensional tolerances, parallelism less than 0.02mm
verticality less than 0.01mm.